Reverse Bottom Bars
Anthony White 2990 x 2995 Reverse Bottom Bars Deep Channel Blinds ( Left Control Side )
Now starting from $711.36! (Was $790.40 – Save 10%)
Reverse Bottom Bars




Every component is purposefully over-engineered for long-term reliability, from the heavy-duty channels to the high-tensile hardware. This design ensures years of smooth operation with minimal maintenance, making it ideal for patios, pergolas, and exposed outdoor areas.
Features
- Robust Construction – strong stainless steel locking pins
- Wind-Friendly Design – Flexible fabric guides reduce stress in gusty conditions
- Heavy-Duty Hardware – Engineered for high-use and harsh environments
- Smooth Operation – Compatible with manual or motorised systems
- Custom Look – Choose from a wide range of fabrics and finishes
Installation Guide
Installing an outdoor channel blind enhances your alfresco area by providing effective wind resistance and a sleek, modern appearance. Here’s a step-by-step guide to help you with the installation:
Tools & Materials Needed
Tools:
- • Measuring Tape
- • Pencil or chalk
- • Level
- • Screws
- • Power drill with appropriate drill bits
- • Screwdriver
- • Ladder
- • Safety gear (gloves, safety glasses)
Materials:
- • Deep channel blind kit (including brackets, blind, and side channels)
- • Screws and anchors suitable for your mounting surface
Step-by-Step Installation Guide
1. Measure and Mark Mounting Points
- • Determine the desired position for your blind.
- • Use a measuring tape to mark the locations for the top brackets, ensuring they are level and equidistant from each end.
- • For a clean installation, use a chalk line to mark a straight line across the mounting surface.
2. Install the Top Brackets
- • Align the brackets with the marks you’ve made.
- • Drill pilot holes into the mounting surface (e.g., wall or ceiling).
- • Secure the brackets using screws, ensuring they are tight and level.
3. Prepare the Side Channels
- • Take measurements and make matching marks on the insides of your side channels, being as accurate as possible.
- • Drill a hole through the side channels at each mark using a small (3.5mm) drill bit through both surfaces, then widen the hole on the inside with a larger (11mm) bit.
4. Install the Side Channels
- • Position the side channels against the mounting surface, aligning them with the top brackets.
- • Secure the channels in place using screws, ensuring they are vertical and level.
5. Install the Blind
- • Lift the blind and hook it onto the installed top brackets.
- • Ensure the blind is securely seated and operates smoothly.
6. Adjust and Test the Blind
- • Manually test the blind to ensure it raises and lowers smoothly without obstruction.
- • Adjust the side channels if necessary to ensure the blind moves freely.
Tips for a Successful Installation
- • Choose the Right Location: Install the blind in a sheltered area to protect it from strong winds.
- • Handle with Care: Avoid pulling the blind too tightly during installation, as it can expand and contract with temperature changes.
- • Safety First: Always use a ladder safely and wear appropriate safety gear.
Content goes here .. (2)
There are no reviews yet. Be the first one to write one.
Featured Collections
Anthony White 2990 x 2995 Reverse Bottom Bars Deep Channel Blinds ( Right Control Side )
Now starting from $711.36! (Was $790.40 – Save 10%)
Anthony White 2990 x 2995 Reverse Bottom Bars Deep Channel Blinds ( Left Control Side )
Now starting from $711.36! (Was $790.40 – Save 10%)
Paul Varley 2413 x 1485 Gearbox Outdoor Wired Guide Blinds
Now starting from $749.63! (Was $832.92 – Save 10%)
Paul Varley 2428 x 1485 Gearbox Outdoor Wired Guide Blinds
Now starting from $749.63! (Was $832.92 – Save 10%)
Anthony White 2990 x 2995 Reverse Bottom Bars Deep Channel Blinds ( Right Control Side )
Now starting from $711.36! (Was $790.40 – Save 10%)
Anthony White 2990 x 2995 Reverse Bottom Bars Deep Channel Blinds ( Left Control Side )
Now starting from $711.36! (Was $790.40 – Save 10%)
































Reviews
There are no reviews yet. Be the first one to write one.